Spigot Sentence Examples

Just because it comes out of a spigot doesn't mean it's been treated.

It uses the same small spigot as the the 125 cylinder.

Tony sanded a flat on two opposing corners and fixed it between centers, he turned a spigot then mounted it onto a chuck.

Opening the Iraqi spigot would flood world markets and drive prices down substantially.

His reign is full of contentions which were not wars for a principle, but were scuffles for the control of the spigot of taxation.

The spigot mortar bases were allotted to the Home Guard.

He started between centers to form a spigot and then into a chuck to turn the rest.

He then presented an 8 " Ash bowl blank to the lathe; first he turned the base with ease which included a spigot.

Air handling STB and STE units are provided as standard with a duct spigot outlet for connection to ductwork.

He then presented an 8 Ash bowl blank to the lathe; first he turned the base with ease which included a spigot.

Spigot mortar bases are often found covering roads or lying next to pill boxes.

Another very individual aspect to this carp rod is the reverse spigot joint.

Remember to use an SD1 spigot bush in the end of the crankshaft to match the input shaft of the new gearbox.

Internal or spigot ferrule Many of the leading rod makers use the internal or spigot ferrule.

The flue pipe must be suitably sealed with spigot end facing down (into the socket of the pipe below).

Remove the stove 's baffle, and then pull the flue spigot into the stove 's flange.

Locate your vegetable garden near a hose, spigot, or rain barrel, or at least close enough so that you can easily run a hose from the water source into the garden as needed.

Consider also how far away the water spigot is from the garden.

Whites store on a refrigerator shelf, and the wine is dispensed through a spigot on the front of the box.

When contracting collets are used the blank is roughed down to a cylinder between centers and a small spigot turned on each end.

Internal or spigot ferrule Many of the leading rod makers use the internal or spigot ferrule Many of the leading rod makers use the internal or spigot ferrule.

Remove the stove's baffle, and then pull the flue spigot into the stove's flange.

Each rodding eye includes anchor tangs, and is available with either a vertical or 45 degree angled outlet spigot.

The family consists of a double solvent socket, solvent socket spigot and push-fit socket spigot versions to suit any application or installer preference.

A spigot tail replaces the original socket for direct connection, promoting best plumbing practice for either solvent weld or push-fit systems.

First, there is the centerset style, which consists of a spigot with the water control handle attached to its top or side.

Customers could separately order wine yeast and a spigot for their juice barrel and make the wines in their home.

Widespreads have two handles and a spigot and they are all separate pieces, meaning the sink or counter must have three holes in it to attach each piece.

Finally, it somehow seems less romantic to whip out a box of wine and pour it from a spigot at a candle lit dinner than it does to uncork a bottle of wine and sip at it.

These usually have two handles, one for hot and one for cold water, but the handles and the spigot form one unit that is attached to the plumbing through one hole in the sinktop or countertop.