How to use Showerhead in a sentence

showerhead
  • Save water by installing a low-flow showerhead.

    1
    0
  • Install low-flow shower heads - An inexpensive low-flow showerhead, combined with shorter showers, will result in major water savings.

    0
    0
  • Lower showerheads - when a showerhead is fitted high above a shower, a lot of water is wasted as the water is sprayed a greater distance.

    0
    0
  • Lowering the showerhead will give a more targeted water jet and reduce the amount of hot water that is wasted.

    0
    0
  • Install an energy efficient showerhead to conserve water and save energy.

    0
    0
    Advertisement
  • Most showerhead problems are easy repairs, and taking a few extra minutes now to repair a drip can save you money and help preserve valuable water resources.

    0
    0
  • According to the Environmental Protection Agency (EPA), a showerhead leak can waste as much as 3,000 gallons a year, and that's not just water going down the drain; it's money out of your pocket.

    0
    0
  • Showerhead leaks usually occur for two reasons, either the washer inside the showerhead is damaged or worn, or the little holes in the showerhead or internal parts are encrusted with lime and other mineral deposits.

    0
    0
  • Tight areas, like the spray outlets in your showerhead, are particularly susceptible to mineral buildup.

    0
    0
  • After a while, water running out of the showerhead will begin to back up and look more like a waterfall than a shower spray, and leaking will occur long after the shower is turned off.

    0
    0
    Advertisement
  • Unscrew the nut and remove the showerhead from the outlet pipe.

    0
    0
  • Sometimes this can be challenging, especially of the showerhead is old.

    0
    0
  • To protect the finish from scratching, wrap the showerhead in an old rag before you break out the wrench.

    0
    0
  • Disassemble the parts of the showerhead, but make a drawing showing you how to put them back together.

    0
    0
  • Place a dab of silicone grease on the outlet arm threads and reinstall the showerhead.

    0
    0
    Advertisement
  • Remove the showerhead from the outlet arm by unscrewing the attaching bolt.

    0
    0
  • Remove the washer from the showerhead assembly.

    0
    0
  • Install the washer and reinstall the showerhead.

    0
    0
  • First, remove the faucet trim and spout, as well as the showerhead.

    0
    0
  • Koolaid Shower-Unscrew a shower head and fill it with Koolaid powder, then tighten the showerhead.

    0
    0
    Advertisement