Sanding Sentence Examples

Tack cloth - Use tack cloth to pick up the sawdust left behind from sanding.

Once you have all the basic supplies and equipment for sanding your floors, you are ready to begin and on your way to brand new, or good as new, beautiful hardwood floors.

Switch sanding sheets - Work your way up through the different grits of the sanding sheets.

Even if it doesn't seem necessary, sanding will roughen up the area, allowing the paint to better adhere to the surface.

The last thing you want to do is install a floor so thick that you are sanding down doors and replacing thresholds as well.

Scraping or sanding lead paint creates large amounts of dust that can poison people in the home.

The worst thing that can happen is you don't like it and you have to paint over it (which can involve sanding or other steps when you're trying to get rid of texture).

Dermabrasion is essentially the sanding away of the top layer of skin.

The bottom of the body can now be finished either by sanding on a disk, or a belt sander, or by turning.

Sand the filled slot smooth using a sanding block with 180 grit sandpaper.

The sheeted surfaces of the rest of the model are treated with sanding sealer then tissue covered.

You could try Finney 's shellac sanding sealer to separate the stain from the finish.

When dry, sand the surface smooth with a sanding block using 80 grit silicon carbide (used dry).

If it's just a small amount, try sanding it down with a light-grit sandpaper to smooth it out and then apply a small amount of varnish with a foam brush.

Sanding - After you have scraped most of the old paint off of the beadboard, go over the surface with a medium-grained sandpaper to remove any residual paint.

Newer pieces of furniture often replicate this aged look through distressing or sanding a painted top coat to expose areas of the wood or underlying paint colors.

Dust the piece with a clean paint brush to remove the sanding dust.

Give all of the tiles a light sanding to ensure proper adhesion of the primer and paint.

Once it's dry, give the primed area another light sanding.

Inking, sanding, or distressing the edges of your page will also help to give it the retro feel you desire.

If you're having trouble trimming, however, you can also try sanding the edges lightly with fine grit sandpaper and adding a bit of brown ink for a "distressed" scrapbook look.

Give a frame a distressed look by crumpling and sanding it before adding to your heritage scrapbook layout.

While you can embellish your paper with techniques like sanding and stamping, home-printed paper typically does not feature the exciting textures you can find in craft stores.

Try using rubber stamps, embossing powder, sanding, and layering to give the printed paper a more interesting texture.

Consider embellishing your quote with paper crafting techniques like sanding and embossing.

This involves sanding it down and reapplying a finishing product to protect and seal the wood.

With recessed lighting, you would have to do a drywall repair job complete with a new piece of drywall, tape, sanding and mudding.

Then follow up with a sanding with the 800 grit sandpaper, then the 1000, then the 1500 and then the 2000 grit sandpaper.

Prepare damaged or uneven floors by sanding, filling cracks with a leveling compound and/or laying plywood.

This will help create a silkier finish and reduce or eliminate the need for sanding.

No sanding, staining, or treating is needed, which saves you a lot of time and money over the lifetime of the deck.

Properly sanding hardwood floors ensures that the finished floors are gorgeous.

Sanding hardwood floors is a big job, no matter how big or small the room, so you want to make sure you have the proper equipment.

Fine grit sandpaper - You need to purchase 220 grit sandpaper in order to make sure your floors are smooth to the touch and any marks left by previous sanding are gone.

Respiratory masks - You need to wear respiratory masks while sanding the floors and during the cleanup process.

This step is often overlooked when sanding hardwood floors.

A light sanding before the final application helps eliminate any bumps or rough spots on previous applications.

This "sanding" is done with a motorized tool that has a skin sander attached.