Prongs Sentence Examples

The scums forming on the top of the continuous defecator become so hard and dry that they have to be removed from time to time with a specially constructed instrument like a flat spade with three flat prongs in front.

Imagine now that a fork with black prongs is held near the cylinder with its prongs vertical and the plane of vibration parallel to.

In a common form of electrically maintained fork, the fork is set horizontal with its prongs in a vertical plane, and a small electro-magnet is fixed between them.

The Papuan comb is characteristic. This is a long piece of bamboo split at one end into prongs, while the other projects beyond the forehead sometimes two feet or more, and into it are stuck the bright feathers of parrots and other birds.

After the stern coast of county Clare there follow the estuary of the great river Shannon, and then three large inlets striking deep into the mountains of Kerry and Cork - Dingle Bay, Kenmare river and Bantry Bay, separating the prongs of the forklike south-western projection of the island.

A proper Potato fork has broad flat prongs to avoid damaging the tubers.

Create a log effect, using the prongs of a fork.

You will also receive oxygen through small nasal prongs.

The standard binding for an assignment is a colored assignment folder which holds the work together with metal prongs or a spiral binding.

The grease applicator support prongs should both be in line with the ends of the cooling block.

The old-style wall sockets, often rated at 600 watts, take two round prongs.

To prevent shrinkage pierce the bottom pastry with the prongs of a fork.

A winnowing fork is a long handled tool with an array of wooden prongs fanning out at one end.

Instead, search for golf shoes that have plastic prongs on the bottom.

Try to find a pair that has replaceable prongs!

The prongs on the collar point inward toward the dog's neck, and when the collar or leash is pulled, the prongs "pinch" the dog's throat.

If the necklace or charm has prongs, be sure the prongs hold the gemstones tightly.

Nasal prong mask - With this mask, nasal prongs are inserted into each nostril and form a seal on the inside edge of each nostril.

Nasal prongs are inserted into each nostril, sealing against the inside edge of each nostril.

These prongs are located on the inside of the lens, near the nosepieces.

Additionally, the plastic prongs are coated for comfort and safety.

Since they're magnetic rather than the type with metal prongs that fit around the lenses, so they're much more convenient to put on and take off.

The tuning fork is a metal instrument with a stem and two prongs that vibrate when struck.

A gentler way of assisting breathing, continuous positive airway pressure (CPAP), delivers an oxygen mixture through nasal prongs or a tube placed through the nose rather than an endotracheal tube.

Once you find the fuse prongs, replacing the fuse is as simple as popping out the old one and inserting the new one;no tools needed.

If the diamond is set with high prongs, such as the classic tiffany setting, the stone appears larger as well.

There are many engagement ring settings, but the most popular is the traditional prong or tiffany setting where the central stone is held by four or six prongs slightly elevated above the band.

Bezel settings hold stones in place by using a metal ring instead of prongs.

Without the sharp corners of prongs, the chances are less that the setting will catch on something.

A bezel setting places the center diamond directly into a metal ring without using prongs.

The design consists of the metal being used to hold the stone in place without the use of prongs.

In addition to choosing the setting style, you should also consider the width of the setting's metal - the prongs or metal rims that will secure the stone.

The diamond settings are typically prongs, channels, or bezels, though pave settings are common for more elaborate and expensive pieces.

If the wedding set has exterior prongs or other protrusions, it is wise to wear the anniversary ring on the right hand to prevent scratches, or the rings may be soldered together to prevent them from rubbing.

Various settings are also available, from traditional prongs to bezel and more unusual choices such as floral clusters, pave settings, and flush rings.

Settings may be slightly more unusual, including prongs, channels, or bezels, or simple settings may be made of platinum.

Furthermore, most one carat solitaires are set in prongs or other open engagement ring settings to enhance their visibility, whereas multi-stone rings can be designed to be more forgiving of lower diamond grades.

Minimal prong settings (typically four prongs) to maximize light into the diamond and accentuate its sparkle.

Cathedral settings can help balance large carat weight stones so they do not seem disproportionate to a slim band, and the arches also add a level of protection to the more delicate prongs at their narrowest point.

Many engagement ring designs, particularly diamond solitaire engagement rings, have delicate exposed edges that can easily be chipped or scratched, while prongs can accidentally be warped, bent, or twisted.

Pave diamonds that are set into the engagement ring mounting, between prongs, or otherwise in locations impossible to set larger stones.

Four high prongs elevate the central stone above the rest of the band and setting, allowing the maximum amount of light to enter the ring and enhance its beauty.

Pave set diamonds in the stone's band or even along the prongs that hold the center stone.

Micro-pave settings along ring bands and prongs for enhanced brilliance.

Accent diamonds set between ring prongs for total sparkle.

Mini-heart tipped prongs for a whimsically romantic touch.

Many diamond wedding bands also use prongs instead of pave settings for greater security with a similar diamond-encrusted look.

When cleaning your ring it is worth regularly checking the stone settings, as damaged prongs may result in a diamond becoming loose and getting lost.

This typically is either a prong setting which means that the stone is set in a basket and held in place with prongs, or a rub over setting.

Vintage Tiffany classic settings have slightly thicker prongs than the newer versions.

Polished tear-drop spaces separate the prongs in the setting.

Three of more prongs extend from a metal basket and hold a diamond in place.

The gem stones are held in place with small prongs.

The ring should be in good condition with no loose stones, loose prongs or scratches.

They are actually bound by tiny metal prongs or beads, so they are relatively secure, but there is a risk of stones falling out.

However, as jewelry ages, prongs can loosen and metal can wear away.

If you've chosen a radiant cut for the diamond in your engagement ring, it's a good idea to educate yourself about the best prongs and settings for radiant cut diamonds.

Because the radiant cut has "blocked" or clipped corners, it requires special prongs to make sure it is securely set in the ring.

Some jewelers use double or split prongs to hold the diamond on either side of each corner, but others prefer single prongs that wrap over each of the corners.

Either way, your radiant cut diamond will require four prongs.

When it comes to choosing a metal for your prongs, you may want to consider platinum.

If you don't want to have your entire ring setting constructed from platinum, you might consider a white gold setting with platinum prongs.

When it comes to prongs and settings for radiant cut diamonds, you have a lot of options.

The diamond is round with a brilliant cut and is set in six prongs.

Since more metal is visible around the stone than settings with prongs, the bezel is often incorporated in more tailored designs, both simple and bold.

It is also more practical for modern active lifestyles to have the rectangular stones set deep in a ring rather than more delicate prongs.

If you select a prong solitaire setting, make sure the jeweler uses prongs that entirely wrap around the corners of the stone.

Make sure the jeweler checks the condition of the ring and tightens any prongs as needed.

Buying a vintage ring is a great way to get old-fashioned, high-quality craftsmanship, but time and wear can loosen prongs and degrade the condition of the setting.

The four corners are usually encased in prongs to ensure that the wearer doesn't get them snagged.

Look for prong settings because they are more durable since prongs cover the delicate untrimmed corners.

An elevated solitaire setting, such as one that uses prongs, can allow more light to enter the diamond, enhancing its sparkle.

For many designs, a jeweler can easily adjust the prongs to fit an oval diamond.

Without the traction offered by particularly placed prongs, soccer players will find themselves sliding all over the field.

If you don't want to purchase a small album from your local scrapbook store, use a binder or a folder with prongs to make the book.