Pliers Sentence Examples

Pliers Use them for flattening the barbs on hooks.

In addition to being handy with this kind of saws, you need to be able to take measurements, use tools such as pliers and wrenches and most importantly, follow instructions.

Twist the ends together with the pliers.

Deeper hooked fish can safely be handled onboard with long nosed pliers used to ease the barbless hook out.

In addition to a good pair of standard needle-nose pliers, you'll want flat-nose pliers, bent-nose pliers, long-nose pliers, round-nose pliers, and side cutters.

Open the boot, use the pliers to remove the rubber covers on the four bolts.

She finally gripped what was left of the arrow shaft with the pliers.

Pliers Used by Russian gangster, Mikhail, to torture Sergei Konchalovsky into revealing the location of a stash of stolen diamonds.

It includes a very ingenious set of folding pliers.

It is the only folding tool on the market that offers locking pliers.

You won't be smirking when I take the pliers to you on the torture table!

Sometime later insulated pliers were made available for this task but I never saw any.

If there is still glass attached to the base remove with long nose pliers.

Simply pull out the 2 pins with a pair of tweezers or small pliers.

With long-nosed pliers adjust the micro-switch arms, so that only a tiny amount of pressure is require to activate the micro-switch.

Use slip joint pliers to free the headlight electrical connector on the back of the housing.

When unfolded for use, the spring-loaded pliers open to fit your hand.

The wire is first crimped (only using pointed pliers and bending the tabs over ).

Buy yourself some rubber grease and a pair of circlip pliers and you're in business.

Now squeeze the rail joiner to fit around the rail with flat nose pliers.

Alternatively, the barbs can be removed using fencing pliers.

They require a special tool to loosen them, that said its very easy to loosen them with a pair of needle nose pliers.

If necessary, simply use a pair of side cutter pliers and then smooth the edges with an emery board.

Another guard pulled out two of his upper teeth with pliers.

All you need are basic tools, such as a hammer, a screwdriver and maybe a pair of pliers.

In order to get the strings out of the tuning pegs, you can either cut the string with wire cutters (or a pair of pliers) and then run it through the hole, or try to guide it through without cutting.

You'll need a router, a table saw and a jig saw, as well as various clamps, soldering equipment, sanders and other basic tools like pliers and screwdrivers.

The only tools needed to install this guard are a ladder, a pair of tin snips, and a pair of flat-nosed pliers.

Once you've finished the safety guidelines above, the actual repairs usually require nothing more than a standard screwdriver, wire strippers and sometimes a pair of heavy duty needle nose pliers.

Curl the stripped end of the cable using either the hole in the stripper or needle-nose pliers.

Use a pair of chain-nose nose jewelry pliers to open a jump ring.

They have a hammer loop, pliers pockets and seven additional pockets.

It could be that the hinge is stretched out or perhaps a screw is loose or missing.If you determine that the hinge is stretched out then use a pair of pliers to carefully bend it back into place.

Warped metal frames, such as Aviators, can often be molded back in shape by bending carefully with pliers.

Clamp down on the micro link with the pliers to squish the feathers and the hair together.

To remove, use pliers to open micro bead and remove the twisted hair and feather.

Use your pliers to make a small loop at one end of the wire.

Use the pliers to bend the wire into a ring formation.

Use pliers to make a loop at the top of the pin.

With a small pair of pliers, begin by forming a small loop at the bottom of the wire that will fold against the bottom of the bottom-most bead on your dangling ornament.

Take along a pair of pliers to use for placing the weight on the line.

The glass artists make the glass by hand using tools such as pliers, a blowing pipe and large glass cutters.

Other than a firm surface upon which to work, you'll only need a pair of small needle-nosed pliers and a small pointed instrument like a watch resizing tool, an ordinary pushpin or a very small screwdriver.

Using the pointed tool, carefully push the pin out then grasp it with the pliers and pull it free.

If you want to get really fancy, buy crimp beads and a pair of crimping pliers.

Use the crimp pliers to crimp the bead against the wire.

Open the ring, slide over the loop in the charm, and close with pliers.

Use your crimping pliers to fold the bead first one way and then the other.

This is one of the easiest beading techniques, but you'll want to make sure you have a good pair of crimping pliers in your collection of beading tools.

Anyone who is serious about making jewelry will tell you that pliers are a necessity.

Look for a wide assortment of stones and beads, as wells as pliers, solder, and other tools for making your own jewelry.

The crafter simply needs a pair of crafting pliers.

The only equipment needed to use them is a pair of crafting pliers, which you can find for only a few dollars.

A few minutes of study and a little practice with the pliers, and you will be ready to make hoop crafts.

Use pliers and wire cutters to remove interesting charms and beads.

Use pliers to hold the other end of the floral wire and push the drill button on.

In comparison, jewelry making requires often requires beads, stringing materials, clasps, pliers, and a variety of other tools that can be rather costly.

Use your pliers to make a loop at the top of your ornament.

Heavy duty pincers or pliers are suitable for cutting snare wire.

She shooed the goat back into the pasture and grabbed a pair of linesman pliers and some bailing wire from the barn.

Fancy wire and tools aren't critical when you're starting out, but you should at least buy some wire that is good quality and a basic beading plier or pliers set that includes crimping, cutting and bending capabilities.