Pcb sentence example

pcb
  • A tone generator and mic amp is provided on the PCB.
    0
    0
  • Residues of polychlorinated biphenyl (PCB) in fatty foods of the Canadian diet.
    0
    0
  • There is an extender PCB which fits on to the Spectrum and a ribbon cable to the keyboard.
    0
    0
  • circuit schematics, with ready to use PCB layout, are also available from the project home page.
    0
    0
  • circuit boards production equipment for small and large producers of PCB's.
    0
    0
    Advertisement
  • describe different methods of making a PCB Understand what surface mount is.
    0
    0
  • Methods The analytical methodology for determining dioxin and PCB concentrations in cows ' milk has already been reported 15.
    0
    0
  • The combined dioxin and PCB concentrations were in the range 2.5 - 6.1 ng TEQ/kg milk fat.
    0
    0
  • managing external machining / PCB / electronics assembly contractors.
    0
    0
  • implicit in the concept of a USO that where a PCB is provided there should be a cash payment facility.
    0
    0
    Advertisement
  • intensifier controller PCB, mounted on top of PSUs.
    0
    0
  • The PCB component layout drawing has the pinouts of the tubes I used marked.
    0
    0
  • mic amp is provided on the PCB.
    0
    0
  • Even then, you may not want to make a PCB every time you use an smt device.
    0
    0
  • For US$45 + p&p (6/05) you get a neat little PCB which you connect to your serial port.
    0
    0
    Advertisement
  • This is the application processor mounted in a small PCB which also carries the necessary EEPROM, and has connectors to the outside world.
    0
    0
  • You are now ready to fit the upgrade PCB into the Pearl motherboard.
    0
    0
  • PCB genes, the structure shown in Fig.
    0
    0
  • PCB design can precipitate a number of benefits that are waiting to be taken up, " says Simmonds.
    0
    0
  • PCB layout kindly contributed by Daniel Bosch in South Africa.
    0
    0
    Advertisement
  • PCB subunits to approximately double the light-harvesting capacity of PSII.
    0
    0
  • PCB material 0.8mm thick with an Er of 2.6.
    0
    0
  • PCB assemblies.
    0
    0
  • They each built a mixer PCB, Philip used his own design.
    0
    0
  • The launch PCB is shown below: At the top is a strip for grounding the outer of the cable.
    0
    0
    Advertisement
  • Some dry pickup type tub vacuum cleaners make use of a speed control PCB.
    0
    0
  • Take the free end of this wire to 470k potentiometer VR1, and wire the potentiometer VR1, and wire the potentiometer to the PCB as shown.
    0
    0
  • propyl alcohol, PCB and other toxic ingredients should not be in your household and bathroom cleaners.
    0
    0
  • resistors soldered in mid-air rather than via the PCB.
    0
    0
  • One of the pots does indeed replace one of the fixed resistors whilst the other is connected the the extra PCB.
    0
    0
    Advertisement
  • If you use larger 1/4 watt resistors, you may need to space the transistors off the PCB slightly.
    0
    0
  • I now have a little PCB edge sticking out one of the ventilation slits on the side of the machine.
    0
    0
  • soldered onto the motherboard and the force can pull the tracks off the pcb surface.
    0
    0
  • Chemicals (e.g., PCB) can be in animal tallow.
    0
    0
  • unscrew the 3 screws & put the PCB back in place.
    0
    0
    Advertisement
  • watt resistors, you may need to space the transistors off the PCB slightly.
    0
    0
  • There are also some resistors soldered in mid-air rather than via the PCB.
    0
    0
  • In some cased the Rochdale PCMCIA slot is soldered onto the motherboard and the force can pull the tracks off the pcb surface.
    0
    0
  • PCB 98 tells of road trips and jellyfish stings, complete with squelching jellyfish sound effect.
    0
    0
  • Unscrew the 3 screws & put the PCB back in place.
    0
    0
    Advertisement