Molding Sentence Examples

I recognize the molding and cornices.

They clung to each other, molding their bodies as one until the raging fire of passion consumed her.

She leaned into him, her warm, soft body molding against his.

She moaned with pleasure and turned, molding her body against his as she kissed him passionately.

Xander found himself hesitating before he released his focus on molding his power.

It's even painted the same color and I recognize the molding and cornices.

Even the keyboard and the mouse that you use are made through plastic molding.

As you form an attachment with your child, you are molding his personality and his sense of self.

Five clever shaped cookie cutters for molding your treats, with doggie themes!

Unguided cutter for panel grooving and edge molding using a fence.

Gas assist injection molding is a low pressure process, reducing the clamp tonnage required for molding.

During a polymer injection molding process, an unexpected periodic pattern is often observed on a molded product surface.

Success takes shape Smooth finish with gas injection molding Even in economy-class cars, drivers are looking for elegance and substance.

Finally ' Montrail ' have come up with the ultimate custom fit self molding foot insoles that molds itself to your foot perfectly.

Between is a priest's door with ornate molding and a Tudor head; lower jambs on both sides renewed in Victorian period.

The bottom line for the lakers to begin molding on national public.

Unlike conventional molding, you are not pressurizing a local gradient area of the machine platen attempting to pack out the part.

Molding by Homestead Your one stop source for fine architectural wood molding by Homestead Your one stop source for fine architectural wood molding.

The bottom quarter round infill is made from a 50mm wide thin molding, then routered to the diameter of the window frame.

The injection molding machine are pretty massive pieces of equipment compared to the size of the disk they have to handle.

The window method I used I will use from now on as it looks much better than ones with rubber molding.

Note the rich wood paneling and crown molding accenting the custom Roman shades.

This is the technique of molding designs into the external plastering of a wall.

A plug was made from marine plywood, which was then used to form the female hull molding.

Where lightweight, corrosion resistant or complex shapes are required NP Aerospace is one of the largest thermosetting molding companies in Europe.

The precise nature of injection molding allows exact curved shapes with reinforcing diagonal ribbing on the structural components of the pool.

Space Puzzle molding is an injection mold tooling development process which can make production components during the final tooling of the approved design.

Resin transfer molding is a cost-effective processing method for composites limited by the time taken to fill the mold.

Space Puzzle Molding is an injection mold tooling development process which can make production components during the final tooling of the approved design.

The design was verified using six sigma design of experiments on prototype 4+4 impression two-shot molding.

The first, ASUSTeK, focuses on their computers; the second, Pegatron focuses on the manufacturing of computer components; and Unihan focuses on other manufacturing not related to PCs like molding and cell phone development.

It uses one sheet of plywood, pieces of 2x4 and 1x4, and some 1/4" molding.

To get that traditional library feel, use wall to wall bookcases featuring a rich wood finish and crown molding details.

It is possible to create an astonishing contemporary bathroom in a regular space, but if you have the opportunity of molding out an architectural area, it will be much easier.

Also, be sure to match architectural elements like molding and flooring with the other rooms.

Apply masking tape to the walls to protect your molding when you paint.

You can use stenciling in the place of crown molding to give your room a finished look.

If your room has crown molding you can just as easily stencil below the molding for a border effect.

Even leaving your walls the same and painting your molding or your ceiling can change everything.

Original historic details such as hardware or molding may have been removed.

Try putting some molding around it to define the chalkboard.

Medallions and shell motifs are just a few of the many designs you'll find in furniture, fabric patterns and architectural molding.

If the idea of molding a piece of foil to a scorching hot turkey breast seems like it would be a difficult proposition, I assure you it is.

Place the foil on the breast of the turkey, molding it tightly to the turkey.

Find a decorator who's skilled with molding fondant, and ask him or her to create small edible figurines to fit a theme on your cake or use as custom toppers.

To help insure against molding, spray your curtain with daily shower cleaner.

It will prevent the curtain from getting wet and molding over time.

One kind of cornice is a decorative molding that hangs horizontally and is usually placed at the edge of buildings or near the crease where the walls and ceiling meet.

Try tinting your own fondant and molding it around a cake that you cut into the shape of a figure, building, object, or other design.

If beadboard isn't for you, consider breaking up the walls with crown molding or a chair rail.

Tub manufacturers still use coated cast iron for molding, as well as more modern materials such as fiberglass and acrylic.

Do you want the look of crown molding without the difficult installation?

If so, you might want to consider installing faux wood crown molding as an alternative to the real thing.

If you are not a purist, then faux wood crown molding may be just what you are looking for.

The faux wood molding you purchase will come with installation instructions.

For example, if you have textured ceilings (also called popcorn ceilings) you will need to scrape off the texture where the easy to install crown molding will go.

Once the crown molding is up you will probably want to caulk around it to seal any gaps.

Styrofoam crown molding is easy to mount, durable and growing in popularity.

Crown molding is a decorative molding attached at the top of a wall where it meets the ceiling.

Styrofoam molding is growing in popularity because it is easy to install and more affordable than wood.

Installing Styrofoam crown molding is an inexpensive decorative option for those who like the rich finishing touch of crown molding without the hefty cost of real wood.

Measure the room(s) where you plan to install the lightweight crown molding and be sure to gather accurate corner angle measurements before you order.

Since there's no nailing or use of power tools, you can paint the molding before you install it.

Install inside and outside crown molding corners.

For most Styrofoam molding, no primer is necessary.

When you're ready to by your crown molding check with your local home improvement store; if they don't have it in stock, ask them if they can order it for you.

If you're a novice do-it-yourselfer, learning how to install crown molding might make you a little nervous because crown molding is installed at an angle and each joint is comprised of compound angles.

If you don't, you may want to use something like Styrofoam crown molding, which can be glued into place.

Plan ahead when you buy your crown molding.

Take your first piece of crown molding and run it into the corner securely.

Cope-cut the second piece of molding so it meets in the corner angle.

Be sure to cut off extra wood from the back of the molding because only the outer edge of the coped molding will be visible, however take care not to cut into the exposed face of the molding.

Attach molding with a few 6d or 8d finish nails.

Stand back and make sure your molding is positioned properly before you secure it.

Joists that run parallel to the molding provide an anchor.

Take a beveled 2 x 2 cut to length and screw it to the wall to provide a surface angled properly for installing the molding.

When you've finished nailing the molding into place, take wood putty and fill the visible nail holes.

Follow up by finishing the nail holes, etc. so that it matches the rest of the molding.

If you're wondering how to install crown molding along a long wall, it's easier that you think.

You'll need two lengths of molding, which will be joined with an angled, overlapping scarf joint.

Apply it to the piece of molding nailed in place.

Then install the adjoining molding piece, making sure the scarf joint meets in a tight fit.

If you're looking for a way to add timeless sophistication to any room in your home, crown molding makes the perfect choice.

If you'd like to add a touch of classic décor to your home but aren't handy with a nail gun, no nailing crown molding might be just the answer you're looking for.

The no-nailing feature makes this crown molding an easy do-it-yourself project.

Instead of trying to handle nail guns, power tools or costly glues, no nailing crown molding is installed with adhesive caulk or drywall compound.

Installation of no nailing crown molding is relatively easy.

When you purchase the molding, buy more than you need so you can finish the job even if you make a mistake in cutting.

When you're finished, you can always return the unused molding to the home improvement store where you purchased it.

Cut a 45-degree miter on one end of the molding.

Measure the next strip of molding against the mitered corner and mark with a pencil.

Continue until all the molding is installed.

To fill gaps at joints and at the top and bottom of the molding, use acrylic painter's caulk.

No nailing molding comes in a variety of styles and can be purchased through your local home improvement store or online.

Until the advent of this easy to install crown molding, installing crown molding yourself required skills that excluded many do-it-yourselfers.

Now, with no nailing molding, installing crown molding yourself is a dream come true.

A cabinet that touches the ceiling can be further integrated into the room by installing crown molding around it.

Another type of ceiling trim to consider is easy to install crown molding.

Styrofoam crown molding is light and easy to handle and cut, and can be glued into place.

Simple crown molding is often a term used by manufacturers for a group of non-wood crown molding products.

Also called no nailing crown molding, this type of molding is often more expensive than traditional wood trims in less expensive woods.

Most no nail crown molding come in kits designed to cover a single room.

Measure the amount of trim required on a piece of crown molding from the kit and cut it to fit.

In most cases, this type of crown molding is available prepainted, so no other finish work is required.

This often happens when installing crown molding in a particularly large room.

While no nail crown molding may be tempting, traditional inexpensive crown molding has several advantages.

Perhaps the most important advantage of traditional crown molding is the lifespan and usability of the product.

Traditional wood crown molding can be painted or refinished with ease.

No nail crown molding, on the other hand, is not easily removed once applied.

If the homeowner decides to remove the molding at a later date, it is often a very difficult task.

Chunks of drywall often come off with the crown molding, making it essential that the tops of the walls be refinished before painting.

Painting the crown molding is also difficult and may require particular types of paint to achieve good coverage.

Simple crown molding may be enticing for homeowners who have no woodworking experience, but may not offer the most value for the home.

Learning how to install crown molding may be a better option unless there is a compelling reason to use one of these convenience products.

Remove the shoe molding from the walls and set it aside for reinstallation later.

Installing crown molding and trim can be intimidating because of the intricacies in how to cut the perfect compound miter joint, and there are dozens of tools out that claim to help you cut crown molding the right way.

However, you only need to be armed with a little knowledge and a basic set of tools to really cut crown molding properly.

The most important first step is to get an idea of what type of molding you want to install.

Then head to your local home improvement store, or crown molding shop and find the proper crown molding for your design.

Crown molding is a piece of wood that is placed along the seams where the ceiling hits the wall.

Practice on scrap molding first, so you don't have to worry about your first cuts.

There are two basic ways to cut crown molding.

You can utilize a miter saw, which has no blade tilt, prop the crown molding up against your fence and set the miter angle.

Alternatively, you can use a compound miter saw and lay the crown molding flat and face up.

You don't need an expensive saw to cut crown molding.

Also, the size of your crown molding will determine the size of saw you need.

Place the crown molding on the left side of the saw and turn it upside down.

Now that you have a handle on how to cut crown molding, you will need to learn how to install it properly.

Just practice with some of your scraps and make certain that you have properly cut the molding first.

If you're off by a little bit, the baseboard, quarter round molding or doorway transition piece may conceal a bad cut.

Replace or install all trim, weatherstrip and molding to the installed door to complete the installation.

While a gutter is a curved, half-pipe that collects wet leaves, molding them to its sides, a gutter screen is flat, allowing the leaves to slide right off.

Too large and you don't reap the molding benefits.

The elasticity and form molding characteristics of Lastex brought about other garments like the girdle, which not only held up stockings but also flattened the stomach.

With guidance, many confused elderly people enjoy molding soft, non-toxic clay or putting together a woodworking project that is pre-cut with pre-drilled screw holes.

This condition is also commonly called positional molding or deformational plagiocephaly.

Deformational plagiocephaly (positional molding)-A form of craniosynostosis in which the head is misshapen, the result of constant pressure to the same area of the head.

When positional molding is identified at less than three months of age, repositioning is usually successful in stopping the plagiocephaly and reversing the flattening.

Jimenez, David, et al. "Endoscopy-assisted wide-vertex craniectomy, barrel stave osteotomies, and postoperative helmet molding therapy in the management of sagittal suture craniosynostosis."

The latter part of the story has similarities to the universal stories of the Great Flood and to the Christian story of creation with God molding Adam from clay.

Next, work a large dollop of hair wax or molding paste through the ends of hair.

This style can be shagged up with molding pastes and creams.

No hair gels, mousses, pastes, molding creams or heavy styling aids are needed when you wear a sedu straight style.

Add some height at the crown using a hairdryer and paddle brush, run some molding wax through the ends for texture and revel in richer hair.

Blow dry and finish with a molding paste or wax for defined edges.

Once hair is dry, separate and define the texture with a lightweight molding paste.

To style this shag, air or blow dry and work in a texturizing or molding paste for definition and hold.

Should you opt for a male peasant look, hair can be a few inches long and worn in a layered shaggy and disheveled shape with the help of a molding paste or wax.

When defined and separated with a molding wax or pomade, minimal layers can also take upon a shag-like style.

His style swept across his forehead and was defined with a touch of molding paste to separate while adding texture to his fine locks.

These square cut swimsuits do just that by molding every aspect of the body.

The supplies you need for melting, pouring and molding a soy candle are the same ones you would use for a conventional paraffin candle.

Try hanging them from doorways or molding.

He is constantly aware that he is molding his children into strong adults and guides them in education as well as in matters of the spirit.

These are available in the same fun and fresh colors with the distinctive jelly resin molding and strap.

Before the children begin molding their clay, ask them what symbols they associate with Easter and why the holiday calls these things to mind.

While cheese salt can be added to the curd before molding, it is often sprinkled over the cheese once it's in the mold.

However, though constriction and molding of the ribcage and waist can be seen on O'Followell's X-rays, few of the feared health effects were seen or proven.

A bit of molding, or slight padding in the bra will add curves to a boyish figure, and a thong will add a bit of spice.

This means you'll have better shaping and molding capacity.

Half slips are perfect under skirts, and can also be worn under dresses, if you're just looking for a little help molding your bottom half and midsection.

When all else fails, or you simply can't decide on one or two styles, you can always turn to sports bras that feature specific contouring and molding.

Arnold Schwarzenegger is the actor responsible for molding the "character" of the original terminator robot.

You can purchase parts manufactured for other models such as those designed for model planes, cars and trains or you can make some of your own by molding parts.

Black smoke swirled in his other hand, molding into a cuff.

She yielded to the warm, strong hug, her frame molding against his.

Together we might peruse some of the more notable entries submitted to that inane contest in case a gem lays molding in the rubble heap of stupid begging missives from fantasying idiots.

If you feel your carpentry skills don't quite rise to the challenge of installing crown molding, you can always buy the easy to install type molding or lightweight styrofoam crown molding available at your local home improvement store.