Machined Sentence Examples

machined
  • The massive graphite is very easily machined and is widely used for electrodes, dynamo brushes, lead pencils and the like.

    4
    1
  • The main tube must be accurately machined as it has to be readily trained in its stuffing-box as well as be water-tight in all positions, through a considerable range of vertical travel.

    1
    1
  • A special nickelchrome steel was manufactured and machined by Messrs.

    1
    1
  • The sulphur-content should not exceed 0.12%, and it is better that it should not exceed 0.08% in castings which have to be soft enough to be machined, nor 0.05% in thin castings the metal for which must be very fluid.

    1
    1
  • Our new machined aluminum Drive Cone comes with a Lifetime Warranty.

    1
    2
  • This unit is housed in their beautiful new casework, complete with a stunningly machined aluminum front fascia.

    1
    1
  • All gears were machined from drop forgings and their shafts hardened and ground.

    0
    1
  • The 10-inch lathe featured flat ways 1 1/2 inches wide with the edges of the central slot machined to guide the tailstock.

    0
    1
  • They were finish machined on a large horizontal miller with a ganged cutter setup.

    0
    1
  • All metal CNC machined alloy swashplate with precision radial bearing and hard chromed PTFE lined center swivel ball.

    0
    1
    Advertisement
  • The scrubber is fitted with substantial cast-iron doors. having machined faces, through which cleaning or charging of the coke scrubber may be effected.

    0
    1
  • The Florence arch is made from machined pressure impregnated softwood with a laminated curved top.

    0
    1
  • Every log cabin in our range is machined from premium quality Scandinavian softwood.

    0
    1
  • When machined, these boards, especially the urethane insulation board, produce a fine dust.

    0
    1
  • If the part or piece that you are missing is a screw or other machined item, check your local home improvement store first.

    0
    1
    Advertisement
  • This bass has a 20-fret, tapered maple neck, adjustable bridge, die cast machined heads and a split-coil pickup.

    0
    1
  • Our cradle is machined to a very precise tolerance of 0.001 inch or less out of high-strength metal alloys, for a perfect fit to the iPod nano 6G.

    0
    1
  • This will need to be machined, or your rotor will need to be replaced entirely.

    0
    1
  • The deck is constructed from CNC machined 6061-T6 aluminum.

    0
    2
  • Short Throw Shifter Barely six inches long, this shift handle designed for 5.0 Mustangs is machined from ½ thick aluminum.

    0
    2
    Advertisement
  • We incur the added expense to protect the transmitter in a sturdy housing machined from aircraft aluminum.

    0
    2
  • The azimuth Drive is based upon a helical gear machined into the outside race of the azimuth bearing.

    0
    2
  • The indices are machined directly into the bezel without the use of bezel inserts, which can corrode or come loose at deep depths.

    0
    2
  • The base plate was machined from a solid aluminum billet.

    0
    2
  • The white metal is then machined to the correct radius using the big borer.

    0
    2
    Advertisement
  • This handsome replica is machined in chrome plated brass with copper, accented with die-cast metal detailed parts.

    0
    2
  • These are machined to a depth equal to half the specimen thickness and spaced equidistant from the specimen mid-length on opposing faces.

    0
    2