Gears Sentence Examples

Katie scraped gears and smirked through her hand.

Allen key for these screws is included with each pack of gears.

For crossed helical gears to operate successfully they must have the same pressure angle and the same normal pitch.

You'll need a thin, dry lube for the cables and pivots of your brakes and gears.

Split frame pickup using 2mm Assoc system with tufnol block frame spacers, 2mm Assoc gears and axle muffs.

I eventually overtook two into front to be overtaken by a wee guy pushing big gears.

Gears are changed not with a standard stick shifter, but with steering wheel-mounted paddles to enable quick, smooth transitions and response.

Activities from Inventor's Workshop link directly to the teaching of wheels and axles, gears, pulleys and cams.

This type of process is applied to needle or roller bearings, gears and piston rings, gears and piston rings.

A modern roadster has ' no maintenance ' enclosed hub brakes, gears and chain along with integral lighting, luggage and security systems.

Mixed gear/chain valve timing drive with the two gears (one per timing chain) located in the crankcase to reduce cylinder head dimensions.

At home we read the India bit from story of the world, and made another wacky wiggler with the gears.

This type of process is applied to needle or roller bearings, gears and piston rings.

And as the grinding gears of the plot push us ever further into a corner, we can feel the sap rising around us.

This is the long splined shaft with a sixteen tooth spur gear at one end on which are mounted the other countershaft gears.

Clicking gears, squealing brakes, cables dying for some lube?

The lowest gears may only be necessary if the vehicle is loaded or when you are climbing a steep gradient.

If the gears are in the correct position then slide the new thrust washers into place between the carrier and planet gear.

Having many gears on your bike will greatly increase your hill climbing speed during races.

Whether you need two or three gears in front depends on the type of terrain that you will be riding on.

The Xbox 360 from Microsoft is well known for its library of first-person and third-person shooter games like Gears of War, Halo and Call of Duty.

These bikes have flat handlebars and low gears.

They're designed to provide more comfort through more upright seating, soft seats, and lower gears.

There are only two forward gears in the Roadster, and unlike a manual transmission, the car will not stall if shifted into the wrong gear.

The wind spins the rotor, which turns a shaft, but the rotation isn't enough to generate adequate energy, so a set of gears are attached to the shaft in order to increase the rotation.

You can make things move by gutting out sections of cake and adding gears.

When all the gears fit properly, the machine works wonderfully, but if a gear is out of whack, the machine has difficulty doing it's job.

They come through on their promise with their Dethklok tabs and have good versions of songs like Face Fisted, The Gears and Thunderhorse.

Retirement gifts are an opportunity to joyfully haze the celebrant as he or she switches gears in life from full-time employment to new opportunities.

This anticipation is further enhanced by the tribal music playing in the area that sets the blood pumping and gears up riders' nerves for the ultimate endurance and immunity challenge.

Killzone 2 - One of the primary features of this first person shooter is the "lean and peek" mechanism for using cover in combat conditions, not unlike the gameplay style of the Gears of War franchise.

There are more than a few female gamers who play more male-oriented titles like Gears of War, just as there are male gamers who may engage in more female-oriented titles like Farmville on Facebook.

This is the same service used for playing online with such games as Halo 3 ODST and Gears of War 2.

The Xbox 360 was originally seen as the system for hardcore gamers, since it focused largely on titles like Halo and Gears of War, but it has since gone on to include more family-friendly fare.

Three years in the making, Halo 3 is the highly anticipated sequel to Halo 2, the latter of which was the most popular game on Xbox Live for a solid two years before the release of Gears of War in 2006.

Big name games continue to appear on the system (like the incredibly well-received Gears of War) and the online service, Live Arcade, lets owners download casual games such as Bejeweled and play them in their living room.

You are able to change the alignment, tire type, brakes, gears, differentials and aerodynamics of the front, side and rear portions of the car.

You will be able to watch your driver shift gears and react to oncoming crashes.

The biggest competitor, however, is the very positively received Gears of War, a title that won numerous game of the year awards.

When you hop inside the clock, the gears may be spinning too fast for you to handle!

It may be home to some great titles like Gears of War and Street Fighter IV, but there are also several Xbox 360 problems that could be causes of concern.

These were expensive and difficult to keep because the water would seep into the boat and cause rusting of the gears.

It is possible that people with OCD experience overactivity deep within the brain that causes the cells to get "stuck," much like a jammed transmission in a car damages the gears.

The Singer Model A, released in 1859, offered a large stand with lots of space to work, beveled gears and a stylish appearance.

As the leather era faded, LA ROXX began to shift gears in response to the increasing demand for sexy fashions.

Soon afterward the company added wheels, gears, and pulleys which allowed children to create vehicles of all kinds as well as items with gears.

Lego Technic creates more advanced, complex designs with moving parts like pistons, gears, and working motors.

The mechanics of the mixer use several gears to operate.

These gears are made of a thick rubber or plastic.

While designed to hold-up through thousands of uses, on occasion the gears may come dislodged, causing them to break.

Gears are one of the hardest parts of a KitchenAid mixer to replace, and you may need to take your appliance to a repair shop if you are not comfortable fixing it yourself.

Other parts, like the gears, require more time to repair, and may not be something you want to replace yourself.

Clean the appliance according to the owner's manual, place the cups and mugs on the top shelf of the dishwasher only and don't force the blade gears over the spinning mechanism.

Rumor has it the Len Wiseman is currently in talks to work on the film Gears of War, based on the video game with the same name and it's looking unlikely that Wiseman will be working on the continuing Underworld series.

An escapement keeps the time, while the gears connect the escapement to the hands of the watch in the display.

Features include perfectly equilibrated hands, precision gears that require no lubrication, and an annular balance that produces a mere two vibrations per minute.

If you can't find it, just look near the gears.

However, when you throw shifting gears into that mix, things can get a lot more complicated and it requires much greater multitasking skills.

Driving a standard requires the ability to change gears while trying to keep track of all of the normal, multiple driving tasks.

With the clutch in, practice shifting through the gears.

Shift through the gears a bit so you have a good feel for how the gearbox is laid out.

You might grind the gears a bit until you get it right, but your car will be OK.

These higher gears get easier and easier to shift into, and the process is the exact same for all of them.

Your car will automatically shift through the gears as you speed up.

There are probably five gears as well as reverse on your shifter.

Run Through the Gears - To get a feel for how the car shifts, try to run through the gears with the car off.

With the clutch in, move the shifter through the gears starting with first gear.

Get a feel for how the car's shifter works and how it feels to move through the gears.

Get Up to Speed - Once you get the car moving in first gear, you need to keep moving through the gears to go faster.

You continue this process as you move through all the other gears.

When you first start driving a stick, it is not uncommon to grind the gears a bit and stall the car.

Or maybe you simply feel embarrassed when learning how to drive a stick shift because you don't want to make the gears grind or make the car lurch and look silly or amateur.

Knowing how to shift gears and use a clutch will give you greater freedom when it comes to renting a car, buying a new vehicle, or borrowing a friend's car.

You may be wondering how you'll know when to shift gears.

Shifting gears allows you to keep the RPMs from reaching this level.

With the car still turned off, push in the clutch pedal, and practice moving the shifter knob into different gears.

Now that you have the basic idea, you can continue moving through the gears as you begin to go faster.

You'll appreciate the flexibility this skill offers, and soon you'll be teaching others how to shift gears and use a clutch.

The main difference between automatic and manual cars is the way the car shifts gears.

However, in a manual transmission, the driver must use the gear shifter and the clutch pedal to select and change gears.

Regardless of how your car changes gears, shifting is part of driving.

Changing gears allows your car to continue moving faster without reaching those dangerous RPM levels.

Pushing in the clutch pedal allows you to change gears.

When driving a manual car, you need to use this knob to change gears or put your vehicle in neutral.

On the other hand, if you drive on open roads and enjoy shifting gears, a manual transmission might best meet your needs.

Your cars gears should be used for different speeds and RPMs.

The symptoms of this down shift in gears are fatigue, depression, loss of concentration, lethargy, and irritability, just to name a few.

Touring bikes offer options for racks and attachments that can be used to transport goods and supplies, and they have low gears making it easy to tow heavier loads.

Bra companies switched gears and started introducing bras with padding and underwire.

In 2005 the singer switched gears and joined the cast of UPN's One On One, where he played the character of D-Mack for the final season.

While Piers Morgan is still involved in the newspaper industry, he turned his gears toward television.

Setting in motion the gears of her intent for Harry Potter, the author has strategically placed these new faces of influence to mark a twist.

Things are happening, the gears are starting to turn a little faster and Harry is right in the middle of it all.

One of the easiest ways to stay in the comfortable environment of your browser while still getting to work offline on your blog is to install the Blog Gears plugin.

Using the Google Gears technology (which allows you to use many Google apps such as Documents, Picasa, and Gmail offline) it will log into your Blogger site and allow you to edit old entries and create new ones.

The lead is variable in the Stephenson link motion, whilst in the Walschaert and the Joy gears it is constant.

There must be two sets of elevating gears, one which brings the axis of the gun and the sights together on to the target, thus finding the angle of sight and also pointing the axis of the gun at the target, and a second by which, independent of the sight which remains fixed, the elevation due to the range can be given to the gun and read by means of a pointer and dial marked in yards for range.

The rocking-bar is moved by a rack g into which a pinion on a cross-spindle j gears; the cross-spindle is moved by means of a worm-wheel into which a worm on the longitudinal FIG.

If a thousand like gears are to be cast, a thousand moulds must be made up, at least to an important extent by hand, for even machine moulding leaves something for careful manipulation by the moulder.

After doing some stretching exercises and setting his bike's trip odometer, he began, slowly at first, to swing into his rhythmic cadence of 70 revs per minute, maintaining the pace by shifting gears as the country hills rolled beneath his wheels.

We settled for improving last years car by converting to 16 " wheels with covers, improving the aerodynamics & fixing the gears.

The idler gears, on the external drive, ran on grease sealed bearings.

Because there is not spiral angle and no additional developed thrust these gears can be used as direct replacements for straight bevel gears.

Fully controlled three-way catalytic converter with two oxygen sensors Six-speed gearbox with helical gears.

Girls purple bike, 24 " wheels, 18 gears, ex con, suit ages 8 - 12 years. £ 30.

The difficulty and judgment of changing derailleur gears before a hill or after stopping is well known.

This mechanism then uses the rapidly spinning flywheel via the gears to rotate the final drive axle slowly.

Another break point was converted with a superb crosscourt forehand as the 26-year-old went through the gears.

All gears were machined from drop forgings and their shafts hardened and ground.

A technique for calculating the time domain averages of the vibration of the individual planet gears and sun gear in an epicyclic gearbox.

The gears were all hobbed from the solid, shaved, induction hardened and honed to produce the correct tooth form.

While testing out the bike, don't forget to check out how easily it shifts gears.

The RapidFire and Gripshift use different techniques in changing gears, but whatever feels most comfortable is what you should pick.

True to his word, when informed of our decision, he immediately put the gears in motion.

The general characteristics of the distribution effected by these gears are similar.

The crank shaft carries a pinion which gears into a toothed wheel of a coarse pitch, carrying cutters at the ends of the teeth.

These have a speed reduction from armature shaft to bridge column of 1500 to I, through four intermediate spur gears and a worm gear.

Gears are provided for elevating, levelling, aligning the upper and lower optical systems, adjusting the inclination of the reflector and rotating the mast around a vertical axis so that observations may be made and azimuth angles taken in all directions.