Gasket sentence example

gasket
  • I blew a head gasket on mine.
    10
    2
  • Using a system by Kawneer, they were fixed with a silicon gasket, then clip-in metal beading, then another gasket.
    0
    0
  • I thought the RSM was going to blow a gasket, he politely told us to go back to our duties.
    0
    0
  • Two summers ago, we had to replace the cylinder head gasket on Rosy's engine.
    0
    0
  • Can of course fit a thicker head gasket, or retard the timing.
    0
    0
    Advertisement
  • Using a new curly rubber gasket, refit the water pump casing.
    0
    0
  • Not too much otherwise the disturbance to the rest of the old gasket may promote a leak in use.
    0
    0
  • The standard engine gasket set for the MGB comes with the valve guide seals (" O " rings ).
    0
    0
  • When removed you will see the neoprene gasket holding on the air intake box.
    0
    0
  • We have included four different panel joint alternatives which come with matching or contrasting long lasting colored silicone gasket.
    0
    0
    Advertisement
  • Some outlets are mounted on a rubber gasket - others require a seating compound or silicone sealant.
    0
    0
  • Had slight oil leak recently coming out of the rocker gasket, other than that no problems.
    0
    0
  • Ever tried to find a head gasket or brake seal kit for a 1934 Leyland Lion?
    0
    0
  • Color change indicates a chemical reaction between the gasket material and the structural silicone sealants.
    0
    0
  • Careful setting up of the squish clearance by removing either or both cylinder head or base gasket could result in a quicker engine.
    0
    0
    Advertisement
  • The other probability is an air leak at the inlet manifold gasket, the brake servo hose or other small bore vac hoses.
    0
    0
  • This month it has had to have a new head gasket, water pump, thermostat and a pair of rear wishbone suspension bushes.
    0
    0
  • Remove the gasket from the groove in the housing.
    0
    0
  • If you have a gasket kit, you can compare the old gasket with some you have on hand.
    0
    0
  • The rim of each eye piece is cushioned by a foam, rubber or silicone gasket that allows the lens to be held comfortably but snugly against the ocular bones to form a water-tight seal.
    0
    0
    Advertisement
  • KitchenAid blenders use a rubber gasket to hold the cutting assembly to the blender base.
    0
    0
  • The rubber gasket can also become warped over time.
    0
    0
  • Once warped, the gasket will no longer fit properly and will have to be replaced.
    0
    0
  • The blender replacement parts pack contains a base, gasket, jar nut and stainless steel cutter blades.
    0
    0
  • Available replacement parts include the blender replacement parts package, bottom screw cap, blender gasket, blender jar and food processor blade post.
    0
    0
    Advertisement
  • The cooker comes with a clip-on spoon and clip-tight gasket lid.
    0
    0
  • Other designs have a gasket lid with latch straps to secure the lead for easy transport without spills.
    0
    0
  • Sealing Ring (Model number - 4900-003) - The sealing ring is a rubber gasket that fits around the base of the blade assembly to prevent liquids from leaking out of the jar.
    0
    0
  • The most common part to go on Rival's blenders is the rubber O-ring gasket that sits between the cutting blade assembly and the container.
    0
    0
  • Over time, this gasket will dry out and need to be replaced.
    0
    0
    Advertisement
  • Peg glass candle holders usually come with a rubber gasket wrapped around the peg, that prevents wear and tear on both the glass stem and the taper holder.
    0
    0
  • Cases with a rubber gasket for water resistance require a good deal of precision to get the gasket back on exactly the right way.
    0
    0
  • Try to keep chemicals such as gasoline and chlorine away from the watch as they may eat away at the gasket and ruin the water resistance and seals.
    0
    0
  • White smoke from the tailpipe can indicate water or antifreeze in the engine cylinder, meaning you have a failed head gasket.
    0
    0
  • Blue smoke coming out the tailpipe may mean a failing gasket, O-ring, or seal.
    0
    0
    Advertisement
  • Black smoke from under the car's hood can indicate burning oil, which may mean a leaking gasket.
    0
    0
  • Lightly grease the top gasket and loosely fit the inlet manifold to the cylinder.
    0
    1
  • If you don't have a gasket available, you can take the old gasket to the hardware store to use as a template to locate a new one.
    0
    1