Whether you need to perform the splits at the end of a routine on the floor, or you're a flyer who needs the flexibility to do the splits while in the air, every cheer position benefits from the flexibility required with this skill.
This process is exactly the same as in the cotton or worsted industry, ring or flyer frames being used as desired.
Either mules, ring frames, cap or flyer frames, the choice of machine being determined by the size or count of yarn intended to be produced.
Erling Jensen1044 South YatesMemphis, TN 38119(901) 763-3700www.ejensen.com Resources Memphis Restaurant Association The Commercial Appeal Dining News The Memphis Flyer Dining Guide
The sheets were severed after printing, brought up by tapes, and carried down to a sheet flyer, which moved backwards and forwards, and the sheets were alternately " flown " into the hands of two boys seated opposite each other on either side of the flyers.
The little fellow who whirls his "New York Flyer" round the nursery, making "horseshoe curves" undreamed of by less imaginative engineers, is concentrating his whole soul on his toy locomotive.
After the impression is made the sheet is seized by another set of fingers and is transferred to a second and smaller cylinder over the larger one, and this smaller cylinder or drum delivers the sheet to the " flyer," or delivery apparatus, which in turn deposits it upon the table.
It is essential that the bobbin should have such a motion, because the delivery of the sliver and the speed of the flyer are constant for a given size of rove, whereas the layers of rove on the bobbin increase in length as the bobbin fills.
Other works include the Sheridan monument in Washington; " Mares of Diomedes " and " Ruskin " in the Metropolitan Museum of Art, New York; statue of Lincoln, Newark, N.J.; statue of Henry Ward Beecher, Brooklyn; the Wyatt Memorial, Raleigh, N.C.; " The Flyer " at the university of Virginia; gargoyles for a Princeton dormitory; " Wonderment of Motherhood " and " Conception."
Let R = the revolutions per second of the flyer; r = the revolutions per second of the bobbin; d = the diameter of bobbin shaft plus the material; L = the length of sliver delivered per second; then (R - r) d.
The product is wound on to the bobbin by means of flyer and spindle, and is known as dandied or fine roving, and is then ready for the spinning frame.