They are also offered in a variety of plastics, including acrylic, epoxy, cellulose acetate, cellulose propionate, polyamide, and nylon, and in different colors, shapes, and levels of resistance to breakage.
Francois, the Ulysses resident dentist, repaired my tooth, saying the epoxy glue applied in Cape Town would have caused an abscess.
The specimens were bonded to the loading blocks using a room temperature two part epoxy adhesive.
Additional improvements can be obtained by adding a further coating of MoS 2, ideally cured within an epoxy binder.
Exterior painted blue with two part epoxy blacking on hull.
casing material is die cast aluminum alloy with epoxy powder paint.
cement grout can be injected instead of epoxy resins.
The carriers are finished in tough epoxy powder coating, except for the stainless carriers, which are hand-polished.
The new finish is typically epoxy resin or a polyurethane coating.
conductivity sensor features an automatic temperature compensated electrode, encapsulated in an impact-resistant epoxy body.
The epoxy filler will keep water from entering the lower crankcase of the engine block, where the oil is.
cyanate ester systems usually contain a small amount of epoxy to aid cross-linking.
delamination caused by the core never really bonding to the skins, injecting epoxy works.
Then drill the smaller hole through the thickened epoxy.
epoxy coated because the sand that is used to blast them gets in the tank.
The next stage was to fill in the missing colors by hand using a cold epoxy glaze colored with artists ' pigments.
epoxy filled enclosure designed for easy mounting in a manufacturing process.
OUTSIDE Having blasted the outside, IMMEDIATELY apply zinc epoxy.
I leave each fly 24 hours (despite the name ' 5-minute epoxy ' ).
Go to a hardware store and by some form of all purpose 2 Ton clear epoxy.
The construction process involves using high temperature epoxy to seal the pressure chamber.
epoxy resin is banned under " The Spirit of the Original Rules " .
epoxy surfboardS are stronger and lighter than traditional fiberglass boards.
epoxy metal putty ' cure.
epoxy adhesive to bond them all together.
epoxy coating in either Gloss or Matt finish.
epoxy glue applied in Cape Town would have caused an abscess.
Polyester resins can be used but for maximum performance epoxy resin gives the best results.
The hold has all been professionally cleaned and painted with 2 part epoxy.
Professional rod builders use either two pack epoxy high build resin, or sometimes a UV curing system.
Fittings shall be protected internally with a red powder epoxy resin electrostatically applied to a average thickness of 150 microns.
The prototype is being built entirely in wood epoxy.
BPA is used in epoxy resins & plastic polymers & has been shown to mimic the effects of the naturally occurring sex hormone estradiol.
fibre void content in vacuum bagged carbon fiber reinforced epoxy resin can reach or exceed 10% .
Any chips must be filled with an epoxy filler.
fixed with epoxy adhesive to ensure they stayed on.
Additives in the form of specially formulated powders can be stirred into the epoxy for special uses.
epoxy grout is hard work to use, particularly the cleaning off bit.
For crack width between 1.0 - 3.0 mm cement grout can be injected instead of epoxy resins.
The body consists of two very small teardrops of red dyed epoxy, with a red game hackle wound between them.
They are generally ambient cure when cured with an epoxy amine hardener.
This process includes a phosphate primer, an electrophoretic coating and an epoxy powder top coat.
Back to the top What is an epoxy primer?
I'm now about to try the ' epoxy metal putty ' cure.
To start with, the use of modern epoxy resin is banned under " The Spirit of the Original Rules " .
We work with a wide variety of flooring materials from epoxy resin coatings to high temperature steam cleanable polyurethane screeds.
Core fills were cast using Araldite 20/20 epoxy resin tinted and bulked using fumed silica and dry powder pigments.
The bottle rim was again thickened with a ring of epoxy modeling putty.
Other options include clear passivated, bright zinc or epoxy powder coated structure in a range of colors.
R.S Multigrip is a high build solvent free unpigmented epoxy resin binder.
However, epoxy bonding is less reliable, and temperature cycling over wide temperature extremes can weaken the bond.
Butt joints, gussets and structural beams and members are all made from the same wood for consistency and those are usually connected with epoxy.
The inside is not coated with plastic or epoxy like some other beverage containers so it's safe for kids.
Sand the bamboo to prepare it for the epoxy that will hold the frame together.
Use hemp, fiberglass or another material to lash the components together and then apply the epoxy to the joints.
Krylon Appliance Epoxy Paints are one product that is made specifically for appliance painting projects.
Epoxy stickers are kind of puffy, while other stickers include places you can write or things that move.
Epoxy stickers are a great design element for scrapbook projects.
You can find an epoxy sticker to fit just about any scrapbook project.
Epoxy stickers are smooth, shiny and raised stickers.
You will find that you need less decoration on a page with epoxy stickers because they fill a page nicely.
Epoxy stickers come in many different designs ranging from flowers to cartoon characters.
If you can't find the right stickers for your project, consider making your own epoxy stickers.
The Internet has a large selection of epoxy stickers.
Frantic Stamper: Frantic Stamper has a selection of epoxy stickers in themes such as seasons, bridal, baby boy, baby girl, butterflies and fairies.
Epoxy stickers are a fun design element to incorporate in a scrapbooking project.
Cover the surface of your sticker in UTEE to give it a glossy look that mimics the appearance of a purchased epoxy sticker.
Each line focuses on a particular animal and includes paper, die cuts, stickers, epoxy embellishments and alphabets.
Fill the holes with epoxy or some other strong adhesive.
While it isn't recommended as often as Cabot or Sikkens, DEFY Epoxy Fortified Wood Stain still shows up often enough as a recommendation from both consumers and professionals.
Epoxy fill is used to patch natural pits and fissures in the stone.
These fissures may be filled with an epoxy resin to mask their presence.
Engineered stone - This style of countertop can look like stone, but it's really a very hard epoxy mixed with one of the hardest substances known to man -- quartz.
Advantages: Usually a blend of epoxy material and quartz, engineered stone is very strong.
An epoxy varnish is used to coat the metal such that no chipping or rust spotting takes place.
Attach metal hinges back onto the frame with an application of quick drying glue or epoxy, which can be purchased at the same drugstore where the kit is purchased.
Epoxy frames are resilient and return to their original shape after being deformed, so they do not need to be adjusted as frequently as other types.
To create this project, you'll need several clear, flat glass marbles, some epoxy, a narrow piece of ribbon, and some tiny photos of you and your friend.
To create this bracelet, you'll need to cut out the photos and affix them to the glass marbles using epoxy.
Apply the epoxy evenly to the flat surface of the marble, and gently press the photo face-up onto the sticky side.
Use the epoxy to seal the backs of the photos and attach the ribbon.
Put epoxy glue around where the straws go into the bottle.
aramid reinforcements, toughened epoxy resins and lightweight foam cores " .
The word usage examples above have been gathered from various sources to reflect current and historial usage. They do not represent the opinions of YourDictionary.com.