There is much in the newspapers about closing the saloons and dance halls and even taking away the slot machines.
"Just thank the quarter slot machine at Mr. Trump's place," Fred said, as they rose to leave.
After a series of phone calls to Denver and some monstrous lies, Dean managed to finagle a slot on the bike tour, not an easy accomplishment given the short time before the popular event.
Reaching through the slot, she poured the cow some grain.
"I'm guessing Toni is Monday, which is why you offered me the Tuesday slot?" she grumbled.
19, consists of an armature a, pivoted at one end h in a slot at one end N of a permanent magnet m, the other pole s of which is fixed to the yoke y of a horse-shoe electromagnet M.
The journal of the axle A, is carried in a bearing or axle-box B, which is free to move vertically in the wide vertical slot G, formed in the frame and called generally " the horns," under the control of the spring.
The common form of non-automatic coupler, used in Great Britain for goods wagons, consists of a chain and hook; the chain hangs loosely from a slot in the draw-bar, which terminates in a hook, and coupling is effected by slipping the =chain of one vehicle over the hook of the next.
The only connexion between the type-wheel and the screwhead S is by the pin p (which is screwed into S), the cylindrical end of which acts in a slot cut in the typewheel.
The middle step and slot are for coins within the remedy.
Each slot leads into a separate compartment and the coins are consequently sorted into three classes, light, correct weight and heavy.
In the case of small and irregular consumers, such as the inhabitants of model dwellings and flats inhabited chiefly by working-class tenants, coin-in-the-slot meters are much employed.
In 1876 the practice of paying a yearly surplus (batig slot) from the revenues of Netherlands India to the treasury at the Hague was discontinued.
In the centre of each weight is a hole capable of admitting the lowest and thickest end of the conical stem C, and a slot is cut into it just wide enough to allow the upper part of the cone to pass.