He receives the raw silk in hanks as it is taken from the reel of the filature, and putting it on a light reel of a similar construction, called the swifts, FIG.
The men devote to the loom those hours which are not required for the cultivation of their little farms; the women spin and reel the yarn during the intervals of their other domestic occupations.
When presses are made in double width a two-reel machine is known as a quadruple, a three-reel as a sextuple, and a four-reel as an octuple machine.
The paper is fed from reels placed at the two ends in decks, one above the other, each reel containing about five miles of paper, and weighing about fourteen hundredweight.
Professor de Louter defines it as " une servitude du droit des gens (servitus juris gentium), et qui differe de la servitude du droit priv y en ce qu'elle ne constitue pas un droit reel (jus in re aliena) mais un droit entre deux personnes de droit international (subjecta juris gentium) " (Revue de droit international, 18 99, p. 33 0).
That portion of the machine which prints the cover is fed from a narrower reel of a different colour of paper from that used for the inside pages.
The sand-pump descends by gravitation, and its fall is checked by pressing hack the lever, so as to throw the reel against a post which serves as a brake.
A similar equalizing effect is obtained by the use of flat rope and reel, the rope winding on itself like a ribbon.
He also wrote a treatise entitled De Petal reel de la presse et des pamphlets depuis Francois P r jusqu'a Louis XIV (1834), in which he refuted an empty paradox of Charles Nodier, who had tried to prove that the press had never been, and could never be, so free as under the Grand Monarch.
To "heave the log," a man holds the log-reel over his head (at high speeds the man and portable reel are superseded by a fixed reel and a winch fitted with a brake), and the officer places the peg in the log-ship, which he then throws clear and to windward of the ship, allowing the line to run freely out.
The sand-pump reel is set in motion by pressing a lever, the reel being then brought into contact with the face of the band-wheel.
They are consecutively filled with nitroglycerin, and are lowered to the bottom of the well, one after the other, by a cord wound upon a reel, until the required number have been inserted.
The sample to be inserted between the magnet poles was prepared in the form of a bobbin resembling an ordinary cotton reel, with a short narrow neck (constituting the " isthmus ") and conical ends.
The two sets of filaments are then crossed or twisted around each other several turns as if to make one thread, after which they are separated and passed through separate guides to the reel round which they are separately wound.
The reel to which the raw silk is led consists of a light six-armed frame, enclosed within a wooden casing having a glass frame in front, the enclosure being heated with steam-pipes.
It was Sir Rowland Hill who first suggested the possibilities of a press which should print both sides at once, from a roll or reel of paper.
Threeand four-reel machines have also been constructed on the same principle, but the more usual arrangement of the four-reel press is to place two reels at either end, with the folders and delivery boards in the centre.
Single and two-reel machines are generally constructed on the " straight line " principle, i.e.