Brady posted two of his most trusted soldiers as guards and geared up for the mission to the Peak.
They are geared so as to work simultaneously and alike.
In this apparatus electric A B C currents are generated by turning a handle (placed in front of the instrument), which is geared, in the instru ment.
Large and powerful geared hoists are not uncommon.
- The Golding Jobber Platen two arms, one on each side Machi, of the platen, which derive ne an eccentric motion from cams geared in connexion with the shaft.
Its speed is greater than the stop cylinder (it may be geared to produce from 1500 to Two copies per hour, printed one side only).
In many of the old kinds of two-revolution machines, owing to the cylinder being geared separately from the type bed, it was apt to be occasionally thrown out, but in the Miehle, for instance, it is only out of gear in reversing, and in gear while printing.
He sprinted, geared down, and just lolled along, experimenting with his body's reaction to the various phases and ultimately pleased with its response to his multiple tests.
The experimental surgeries I performed the first six months were not geared towards curing you at all.
He was hardly underway before he geared down for the long climb and gradually fell into a rhythm of sorts, muscle-pulling pain and gasps of breath as he inched his way up the first long incline.
When one of a series of keys (each corresponding to a letter) arranged round a pointer is depressed, the motion of the pointer, which is geared to the shuttle armature, is arrested on coming opposite that particular key, and the transmission of the currents to line is stopped, though the armature itself can continue to rotate.
It consists essentially of two rollers either both of wood, or one of wood and one of iron, geared to revolve in contact in opposite directions; the seed cotton is fed to the rollers, the lint is drawn through, and the seed being unable to pass between the rollers is rejected.
In large pans a mechanical stirring apparatus is provided, which in some cases, as in Morfit's steam " twirl," is formed of the steam-heating tubes geared to rotate.
Another very excellent method of vulcanizing cut sheet goods consists in placing them in a solution of the polysulphides of calcium at a temperature of 140° C. Rubber employed for the manufacture of cut sheets is often coloured by such pigments as vermilion, oxide of chromium, ultramarine, orpiment, antimony, lamp black, or oxide of zinc, incorporation being effected either by means of the masticator or by a pair of rollers heated internally by steam, and so geared as to move in contrary directions at unequal FIG.
In geared hoists the drums. are on a separate shaft, driven from the crank-shaft by tooth or friction gearing, and make one revolution for, say, 4 or 5 double strokes.
The current to be measured passes transversely across the disk and causes it to revolve in the magnetic field; at the same time the copper brake, geared on the same shaft, revolves in the field and has local or eddy currents produced in it which retard its action.
This last is geared to the shaft of the armature by an endless screw, and the number of revolutions of the armature is reckoned by the counting-dials, which are ' See Electrician, 41, 112, and Journ.
The two clock motions may be geared to a single counting mechanism which records the difference in the rates of going of the two clocks.
It consists of a disk of aluminium, the axis of which is geared to a counting mechanism and which runs between the poles of permanent magnets that create eddy currents in it and therefore exert a retarding force.
But cylinder presses are now made so truly turned, and geared to such nicety, that this idea no longer prevails.
In the centre is a hollow cone, through which passes the driving shaft, geared from below.